Procedure

1. With the computer on a soft cloth, remove the 12 Phillips screws:

  • five 3.5-mm long screws
  • four 6-mm long screws
  • one 4.5-mm long screw
  • one 3-mm long screw
  • one 2.5-mm long screw

2. Using a black stick, carefully peel up, but do not remove, the foil strips and pieces of tape.

Note: When reassembling the computer, reuse the foil and tape to secure the replacement top shield.

3. Warning: Do not bend the top shield.

Lift the top shield off the computer, being careful where it might catch on the highlighted areas shown.

4. Install the replacement top shield, and reassemble and test the computer.

Was this article helpful?

0 0

Post a comment