Before you begin, remove the following:
- Keyboard and RAM shield
- AirPort Extreme Card
- Memory card
- Bottom case
- Bottom shield
- DC-in board
- Top case
- Top shield
- I/O bezel
1. With the computer on a soft cloth, lift up the modem sleeve and disconnect the RJ11 modem cable from the modem board.
- Guide the cable up through the metal channel.
- While supporting the computer assembly, slide the modem port forward and off of the logic board.
4. Install the replacement RJ11 modem cable, and reassemble and test the computer.
Was this article helpful?