Silicone roller over the inside of the glass Note If fingerprints and oils are on the inside of the glass clean the inside first with isopropyl alcohol

Silicone Roller

12. Holding the glass by the edges, carefully line up the metal pins on the inside of the glass panel with the holes at the top of the front bezel and the hole at the bottom of the bezel. Gently lower the glass panel onto the bezel. The magnets on the front bezel will pull panel and hold the glass panel in place.

Cleaning The Inside Imac

13. Clean the outside of the glass panel with a clean microfiber cleaning cloth. If necessary, spray a small amount (two pumps) of iKlear polish on the outside of the glass panel. Wipe the glass until the solution completely disappears and there is no longer any residue or haze. CAUTION: Do not use single wipe iKlear packets or other cleaning solutions to clean the glass.

Lcd Panel Line Haze
  1. Once the glass has been cleaned and polished, visually inspect the glass for any remaining dust, fingerprints, or a hazy residue. If there are contaminates trapped between the LCD panel and the glass panel repeat the cleaning procedure described in this section before returning the system to the customer.
  2. Replace the memory access door.

a i M- '■■ ll !

  1. Stand the computer upright. Note: Fewer dust particles will settle on the LCD panel with the computer in the vertical position.
  2. Roll the sticky silicone roller over the LCD panel to remove any particles.
Disassemble Lcd Panel
  1. Remove the new glass panel from the service packaging. Note: The new panels have a removable film protecting the glass on both sides.
  2. Place the glass on a clean microfoam bag with the inside of the glass facing up (the side with metal pins.) Wearing gloves, carefully remove the protective film from the inside surface of the glass.

5. Clean the INSIDE surface of the glass panel with the silicone roller. Gently roll the clean silicone roller over the inside surface of the glass. Note: If fingerprints and oils are on the inside of the glass, clean the inside first with isopropyl alcohol.

6. Holding the glass by the edges, carefully line up the metal pins on the inside of the glass panel with the holes at the top of the front bezel and the hole at the bottom of the bezel Gently lower the glass panel onto the bezel. The magnets on the front bezel will pull and hold the glass panel in place.

ImChiI

  1. Peel the protective film from the outside surface of the glass panel. If the glass panel pulls away from the front bezel, gently hold it in place while removing the protective film.
  2. Clean the outside of the glass panel with a clean microfiber cleaning cloth. If necessary, spray a small amount (two pumps) of iKIear polish on the outside of the glass panel. Wipe the glass until the solution completely disappears and there is no longer any residue or haze.
  1. Once the glass has been cleaned and polished, visually inspect the glass for any remaining dust, fingerprints, or a hazy residue. If there are contaminates trapped between the LCD panel and the glass panel repeat the cleaning procedure described in this section before returning the system to the customer.
  2. Replace the memory access door.

The following tools are offered in the starter kit (076-1277).

  • Suction cups, Qty. of one (pair)
  • Sticky silicone roller (6-inch) to clean the glass panel, Qty. of one
  • Sticky sheets to clean the silicone roller, Qty of 2 pads
  • Polishing cloths, clean, anti-static, micro fiber "terry" style cloth, Qty. of one (5 cloths)
  • Gloves, lint-free, anti-static, Qty. of two (pair)
  • Microfoam bag to store the glass panel, Qty. of one (5 bags)
  • ESD bag for LCD display storage, Qty. of one (5 bags)

Was this article helpful?

0 -1

Responses

  • gloriana
    How to remove silicone polish from glass?
    9 years ago
  • crassus
    How to remove haze from glass surface?
    9 years ago
  • KERSTIN
    What is silicone haze on gllass?
    9 years ago
  • ghenet
    How to remove silicone hazing from glass?
    6 years ago

Post a comment