Removing the LVDS Cable

1. With the computer face down on a soft cloth, peel up the strips of tape from the LVDS cable on the back of the display panel.

2. Press in on the cable clips and then pull straight down on the cable to disconnect the LVDS connector.

Imac Replace Lvds Cable

3. Lift the LVDS cable from the display panel.

Replacing the LVDS Cable

  1. Connect the LVDS cable to the rear of the display panel.
  2. Connect the LVDS cable to the rear of the display panel.
  1. Replace the tape over the LVDS cable connector.
  2. With both the LVDS cable and the inverter cable connected to the back of the display panel, install the display panel with eight mounting screws.
  3. Connect the LVDS cable and the inverter cable to the logic board.
  4. Replace the front bezel.
  5. Replace the access door.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment