Replacing the LVDS Cable

1. Connect the LVDS cable to the rear of the display panel.

  1. Replace the clear Kapton tape over the LVDS cable connector.
  2. Connect the inverter cable to the inverter board on the rear of the panel. Cover the cable and connector with the sticky, black mylar tape.
  3. Lower the display into the rear housing.
  4. Connect the other end of the inverter cable to the power supply.
  5. Connect the LVDS cable to the logic board. Replace the two T6 screws.

7. Connect the LCD temp sensor cable to the bottom left corner of the logic board. Tuck any extra length of the cable in the area between the CPU fan and the edge of the logic board.

  1. Replace the front bezel.
  2. Clean and replace the glass panel. Note: This step is very important. Follow the procedures to ensure the glass is clean and free of particles.
  3. Replace the access door.
Apple Technologies Explained

Apple Technologies Explained

What is So Great About Apples Design Concepts? There is always a reason why consumers are drawn to a particular brand of product. Apple has the record for drawing people in, and not just Americans, why? Ease of use, thats why.

Get My Free Ebook

Post a comment