Installing the Memory Module

Note: If you are replacing a defective memory module, rather than adding a module, remove the defective module before proceeding.

1. Line up the notch on the memory module with the notch (circled below) on the memory slot.

2. Important: Do not push the clips (circled below) when inserting memory. They are used to remove memory from the slot, not when inserting memory. These clips are fragile and can break.

Gently insert the memory module into the slot. You will hear a click when the memory is completely inserted into the slot. Note: Make certain to push the memory module in the direction of the arrows.

4. Press down gently on the memory until you hear it click into place under the two locking tabs (circled below) on the sides of the slot.

Was this article helpful?

0 0

Post a comment