Spares

  1. A spares kit is included with each replacement part. All spares kits include the Phillips #1 tool and extra screws for the replacement module. All customer removable screws are brass colored. Do not remove screws unless they are brass colored, or you will void the warranty.
  2. An extra thermal sensor cable (shown below) is included with the hard drive. If the original sensor becomes damaged during the disassembly, attach the sensor to the main board and to the end of the hard drive (as shown).

3. An extra LED gasket/light tube is included with the midplane and display/bezel spares kit just in case the original gasket falls off the midplane. The gasket/tube (shown below) is located in the bottom right corner on the underside of the midplane.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment