Removing the Bluetooth Antenna Cable

1. Holding the midplane vertical, route the Bluetooth antenna cable through the small opening in the chassis.

Imac Bluetooth Antenne
  1. On the other side of the midplane, note the placement of the other end of the Bluetooth antenna cable in its plastic holder.
  2. Use a needlenose pliers to pry the Bluetooth board from the holder on the chassis.

4. Release the Bluetooth antenna cable from the chassis guides. If necessary, use a flat-blade screwdriver to carefully pry open the guides.

5. Near the Bluetooth holder, note that the Bluetooth antenna cable runs underneath the speaker and fan cables. Without straining the cables, route the Bluetooth antenna cable under the other two cables to release it from the chassis.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment