Replacing the Bluetooth Antenna Cable

  1. On the back of the midplane chassis, route the Bluetooth antenna cable under the fan and speaker cables.
  2. If you are replacing the Bluetooth antenna cable with a new one, rub away any remaining adhesive on the midplane chassis. Peel off the backing on the Bluetooth holder, and press the holder onto the chassis.
  3. Secure the cables in the cable guides on the underside of the chassis.
  4. Secure the cables in the cable guides on the underside of the chassis.

Replacement Note: If necessary, use a flat-blade screwdriver to press the cable guides closed over the cables.

4. Thread the Bluetooth antenna cable through the small opening in the chassis.

  1. Connect the Bluetooth antenna to the Bluetooth board.
  2. Replace the Bluetooth board.
  3. Replace the midplane.
  4. Replace the back cover.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • Paula
    Where is the antenna on the 20 inch imac?
    9 years ago
  • marko
    How to replace imac 2006 bluetooth antenna?
    2 years ago

Post a comment