Replacing the Fans

1. Connect the fan cable to the logic board. Route the cable under the black hard drive cable.

2. Place the screws into the rubber grommets and tighten the screws.
3. Route the fan cable around the side of the fan you just replaced. Connect the fan cable to the logic board.

4. Place the two screws into the grommets on the fan. Lower the fan into the computer, making sure the bottom end of the fan tucks under the logic board. Tighten the two fans screws.

5. Replace the two screws connecting the video cable to the logic board and place the video cable under the metal clips.
7. Replace the back cover.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment