Replacing the Midplane

1. Position the display/bezel assembly with the display face down on a clean soft cloth.

2. Make sure that the black video cable is tucked into the groove on the bezel as shown. Use the screw hole (smaller circle) as a guide for the cable placement.

  1. Position the midplane over the replacement display/bezel assembly housing.
  2. Lower the midplane into the display/bezel assembly housing.

5. As you lower the midplane, pull the inverter cables through the openings on the right side of the midplane.

6. Replace the six midplane screws,
8. Connect the video cable and replace the two screws.
  1. Replace the inverter.
  2. Replace the optical drive.
  3. Replace the back cover.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment