Fuser Heater Bulb

Before you begin, remove the following:

  • Top cover
  • Side covers
  • Fuser assembly
  • Fuser top cover
  • Fuser pressure roller
Apple Laserwriter 600 Remove Fuser

Remove the three screws that secure the right fuser side cap to the fuser assembly.

Note: In the next step, the gear and gear shaft may fall off. Keep these parts in a safe place. You will need them when you replace the right fuser side cap.

Pull the right fuser side cap away from the fuser frame.

3 Remove the screw that secures the fuser heater bulb to the left fuser side cap.

4 Free the heater bulb from the holding tab.

Caution: Be careful not to touch the surface of the heater bulb. If you accidentally touch the bulb, clean it with isopropyl alcohol.

Carefully pull the fuser heater bulb out of the fuser heater roller.

Fuser Heater Roller

Fuser Heater Roller

0 0


  • JRM
    This info is very helpful. I also have an Apple Laserwriter Select 360 that I believe needs a fuser bulb. Do you know where I could purchase the fuser bulb kit??
    7 years ago

Post a comment