Toner Cartridge Sensor Assembly

Before you begin, remove the following:

  • Top cover
  • Side covers
  • Rear cover
  • Fuser assembly
  • I/O shield
  • I/O controller mount

Note: When you install a toner cartridge, the toner cartridge sensor assembly activates switches SI 01 and SI 00 on the toner cartridge sensor board. When you

Black Plastic Cover

Black Plastic Cover

P118

remove the toner cartridge, the sensor assembly deactivates switches SI 01 and S100.

1 Disconnect connector P11 8 from the toner cartridge sensor board.

2 Lift off the black plastic cover.

3 Remove the mounting screw and release the black plastic tab.

4 Lift out the toner cartridge sensor board.

Sensor Arm and Spring

5 Lift out the toner cartridge sensor arm and spring.

0 0

Post a comment