1. Place the computer so that the bottom panel is facing you.
  2. Remove the tape holding the antenna cables to the enclosure.
  3. Using a jeweler's flat-blade screwdriver, pry open the three latches on the antenna cables ferrite bead and remove the bead from the cables.

4. Using the jeweler's flat-blade screwdriver, carefully pry up the rectangular plastic plate on the bottom panel.

5. Using a jeweler's #0 Phillips screwdriver, remove the four antenna board mounting screws.

  1. Tilt the antenna board away from the back panel a short distance.
  2. Feed each antenna cable separately out through the small opening in the bottom panel.

8. Remove the antenna board and cables from the enclosure.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook

Post a comment