Inverter Board

Tools

  • Soft cloth
  • ESD wrist strap and mat
  • Black stick (Apple part number 922-5065) or other nonconductive nylon or plastic flatblade tool

Preliminary Steps

Before you begin, remove

  • Battery
  • RAM door
  • Top case with keyboard
  • Optical drive
  • Display module
  • Display bezel
  • Clutch cover

Part Location

Caution: During this procedure, do not press on the flat area of the board or on its components. Handle the board by the edges only.

1. Using a black stick or your fingers, disconnect the inverter cable from the left end of the board.

2. Disconnect the LCD panel cable from the right end of the board.

3. Holding the board by the ends, lift out the inverter board from the slot in the display rear housing.

Was this article helpful?

0 0
Its a MAC

Its a MAC

Get All The Support And Guidance You Need To Be A Success At Using Your MAC. This Book Is One Of The Most Valuable Resources In The World When It Comes To The Tips And Tricks Of Having Fun With MAC.

Get My Free Ebook


Post a comment