Tools

The takeapart procedure for the MacBook Pro (15-inch Core 2 Duo) requires the following tools:

  • Clean non-marring work surface
  • ESD wrist strap and mat
  • Multi-compartment screw tray (such as a plastic ice cube tray)
  • 0 Phillips screwdriver (magnetized)
  • 1 Phillips screwdriver (magnetized)
  • Torx T6 screwdriver (magnetized)
  • 4 mm socket wrench
  • Black stick (nylon probe 922-5065) or other non-conductive nylon or plastic flat-blade tool
  • Razor knife
  • Needle-point metal probe
  • Needlenose pliers
  • Tweezers
  • Kapton tape (922-1731) (0.5-inch x 12-yard roll)
  • Thermal grease (922-7144)
  • Gasket kit (076-1238)
  • Alcohol pads
  • Fine-point felt-tip permanent marker
  • Apple Pro keyboard and mouse (for troubleshooting)

Was this article helpful?

0 0

Post a comment