Macbook Pro 2008 Logic Cables

Detox My Mac

Apple Technologies Explained

Get Instant Access

Logic Board Macbook Pro Located

1. (a) For the MacBook Pro (17-inch), use a needlepoint probe to disconnect the cable connector from the logic board, as shown below. Warning: When using a needlepoint probe, great care must be used to avoid slipping off the connector and damaging components.

(b) For the MacBook Pro (17-inch Core 2 Duo, 2.4GHz and Early 2008), sandwich the connector between a finger or thumb on top and a black stick under the cable and as close to the JST connector as possible, and gently pull it straight up and out of its well.

2. Pry up the backup battery from the well in the right speaker.
  1. To install a replacement backup battery, remove the adhesive protector and press the battery into place in the same well that it was removed from the right speaker.
  2. Guide its cable into the channel along the right speaker.
  3. Connect the cable to the logic board.

Note 1: The MacBook Pro (17-inch) connector is keyed to install only one way.

Note 2: The MacBook Pro (17-inch Core 2 Duo, 2.4GHz and Early 2008) JST connector can be reconnected using either your finger or a black stick.

Was this article helpful?

0 0
Its a MAC

Its a MAC

Get All The Support And Guidance You Need To Be A Success At Using Your MAC. This Book Is One Of The Most Valuable Resources In The World When It Comes To The Tips And Tricks Of Having Fun With MAC.

Get My Free Ebook

Post a comment