LED Assembly Cable

Before you begin,

  • Remove the rear cover
  • Discharge the CRT
  • Remove the anode cap
  • Remove the CRT/video board
  • Remove the main deflection board
  • Remove the main board holder
  • Remove the CRT assembly

Awarning: This product contains high voltage and a high-vacuum picture tube. To prevent serious injury, review CRT safety in Bulletins/Safety.

Awarning: Never use a grounding wriststrap until after discharging the CRT.

1 Remove the black degauss cable from the bezel. Connector PC is attached to the cable.

2 Remove the mounting screw and the LED assembly from the bezel.

Was this article helpful?

0 0

Post a comment