Hard Drive

Before you begin, remove the cover.

Caution: Review the ESD precautions in Bulletins/ Safety.

Release the locking tab and disconnect the hard drive power cable from the connector on the logic board.

Disconnect the hard drive data cable from the connector on the logic board.

Locking Tab

3 Release the two plastic latches on one side of the hard drive and lift the drive slightly. Repeat on the other side of the drive and remove the drive (with carrier) from the computer.

Replacement Note: For information on removing the hard drive from the carrier and returning drives, cables, and carriers to Apple, refer to "Additional Procedures" in the Hard Drives manual.

+1 0

Post a comment