Display Assembly

Before you begin, remove the following:

  • Rear cover
  • Main battery
  • Keyboard cover

Caution: Review the ESD precautions in Bulletins/ Safety.

Caution: Remember to replace the battery cover after removing the main battery. Failure to reinstall the cover leaves power connected to the logic board. Removing and replacing modules with power available could damage any modules.

Apple Imac

Disconnect the display cable from connector J1 9 on the logic board.

Left Clutch j-.Retainer"

Twist the left clutch cover back and forth and pull it away from the display.

Lift and remove the left clutch retainer.

4 Pull the display with your right hand while maintaining slight outward pressure on the computer with your left hand. This movement pulls off the left clutch mechanism (1).

5 Disengage and remove the display assembly from the right clutch mechanism (2).

0 0

Post a comment