Peripherals

After external SCSI 1

device is connected, 2

computer no longer 3

boots 4

Switch on external SCSI device before starting computer. Verify that cable termination is correct. Verify that no two SCSI devices have same device address. Replace logic board. Retain customer's SIMMs.

Cursor does not move when you use trackball

1 Reset power manager.

2 Check cable connections between trackball and logic board.

3 Replace trackball cable.

4 Replace trackball.

5 Replace logic board. Retain customer's SIMMs.

Cursor intermittently does not move or moves erratically

0 0

Post a comment