Drive Shelf

Before you begin, remove the cover.

Caution: Review the ESD precautions in Bulletins/ Safety.

Note: For information on the Five-Drive configuration, refer to Additional Procedures.

SCSI Power Cable

SCSI Power Cable

Disconnect the floppy drive cable and SCSI data cable from the logic board.

Note: The SCSI data cable is connected to the PDS card in the Apple Workgroup Server 95.

Disconnect the SCSI power cable from the power supply.

3 Remove the two drive shelf screws.

4 Slide the drive shelf toward the rear of the computer.

Grasp the cable tie and the metal tab and lift the drive shelf out of the computer, being careful that none of the cables catch on the case.

Floppy Drive -

+1 0

Post a comment