Air Port Extreme Card

Only the AirPort Extreme Card may be installed in the Power Mac G5. Older AirPort Cards do not work in this computer.


No tools are required for this procedure.

Preliminary Steps

Before you begin, open the computer and lay it on its side with the access side facing up.

Part Location


  1. Carefully disconnect the antenna cable from the end of the AirPort Extreme Card.
  2. Pull the card straight back out of the enclosure.

Replacement Note: Placing a hand on each side of the card, guide the card down into the logic board connector, making sure to align the front edge of the card's connector with the front of the logic board connector.

Important: Be sure to reconnect the antenna cable to the card.

0 0

Post a comment