PC Compatibility Card Optional

7 Card 5x86 processor operating at 100 MHz 12 Card Pentium processor operating at 100 MHz 7 Card 8 MB DIMM standard, expandable to 64 MB 12 Card 8 MB built-in, expandable to 72 MB 128K Level 2 cache 256 K Level 2 Cache Sound Blaster 16-compatible support MS-DOS version 6.22 included Support for Novell NetWare SPX IPX, TCP IP, and NETBEUI protocols in MS-DOS and Windows environments using the built-in Ethernet connector and an ODI driver network client software not included

Overview

Apple Power Macintosh 7200

The chassis design of the Power Macintosh 7200 Series and WS 7250 computers allows you to access the logic board and its components without having to remove the power supply or any drives. This flexible design makes these computers easier to service and upgrade. Features of the Power Macintosh 7200 Series include A 75, 90, or 120 MHz PowerPC 601 microprocessor with built-in FPU and optional Level 2 cache 5 MB per second internal and external SCSI channels DRAM expansion up to 256 MB using...

Hard Drive

Remove Hard Drive From Mac 7200

Before you begin, remove the top housing. Note As you face the computer, the hard drive is in the top left drive bay. Floppy Drive Shield Blank Shield CD-ROM Shield Floppy Drive Shield Blank Shield CD-ROM Shield 1 Remove the CD-ROM shield, the blank shield, and the floppy drive shield from the front of the unit. 2 Disconnect the SCSI cable and hard drive power cable from the back of the hard drive 3 Pull up the retaining clip at the back of the hard drive and push back the hard drive to remove...

Symptom Charts

Refer to The Cuda Chip in Basics for Reset logic board. Refer to Resetting the Logic Board in Basics for instructions. Replace power supply. Replace logic board. One-part error chord sounds during startup sequence Disconnect SCSI data cable from hard drive and reboot system. If startup sequence is normal, initialize hard drive. Test unit again with SCSI data cable connected. If error chord still sounds, replace hard drive. Disconnect floppy drive cable from floppy drive and...

Workgroup Server Logic Board Diagram

Powerpc Microprocessor Block Diagram

There is only one version of the WS 7250 logic board, which features a 120 MHz microprocessor. This board does not require an auxiliary processor fan. The following drawing shows the WS 7250 logic board. Note Some versions of the logic board have a ROM SIMM while others have the ROM soldered on the logic board. Workgroup Server 7250 Logic Board Diagram - 23 AAUI Ethernet 10BASE-T Ethernet Modem bottom Printer top Video ADB Sound Out top -i Sound In bottom Internal Power CD Floppy 3.3V Power...