Work Group Server Upgrade

The WorkGroup Server 8550/132 Upgrade Kit can be used to upgrade a WorkGroup Server 80, 8150/80, or 8150/ 110. The kit includes everything except:

  • The peripherals (such as the hard drive, floppy drive, and CD-ROM drive), which must be transferred from the original unit you are upgrading
  • Drive carriers
  • Drive bezels
  • Drive shields
  • Speaker
  • CD-ROM audio cable
  • Floppy drive cable
  • Power supply to logic board cable
  • Chassis support bracket
  • Upgrades

WorkGroup Server 8550/132 Upgrade - 5

These parts need to be removed from the original unit and installed in the upgraded unit. Refer to the Take Apart chapter for the product from which you are upgrading for instructions on how to remove these parts.

Refer to the Take Apart chapter in the Power Macintosh 8500/WS 8550 manual to see where the peripherals should be installed in the upgraded unit.

Once you have installed all the necessary parts in the upgraded unit and replaced the top housing, copy the serial number from the original unit to the blank serial label on the upgraded unit.

Note: The WorkGroup Server 8550/132 Upgrade Kit does not include a hard drive bracket.

K Service Source

Was this article helpful?

0 0

Post a comment