IO Card

Before you begin, remove the chassis carrier.

Disconnect cables on the I/O Card.

Remove two screws that secure card to chassis.

Note: Be careful of the voltage regulator when removing or replacing the I/O card.

Screw

3 Remove external I/O screw on chassis.

4 Gently rock the I/O card out of the socket.

5 Remove card from logic board.

Replacement Note: Line up back end (end nearest voltage regulator) of I/O card and push card down into slot. Be careful not to damage the voltage regulator or modem.

Cable Support Bracket

Was this article helpful?

0 0

Post a comment