Before you begin, remove the front bezel.
Note: Expect a loud cracking noise as you remove the bay cover.
1 Press on one side of the bay cover.
2 Insert a screw driver under the lower corner of the opposite side, and pry off the cover plate.
Note: Alternatively, you
can insert screw drivers under each lower corner of the cover plate and pull the sides outward to release it.
Replacement Note: Align the three plastic tabs at the top of the bay cover with slots under the top cover.
Replacement Note: Press the cover into place. You know that the bay cover is secure when you see a space of about 1 mm between the cover and the other plastic panels above and at the sides of the cover.
C-aptive Cover Screw
Was this article helpful?
You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.