Display Bulb

Before you begin, remove the following:

  • Display assembly
  • Top cover
  • Brightness and contrast knobs
  • Display bezel
  • Display

Awarning: CCFL bulbs are thin and break easily. Handle them with care, especially at the delicate solder joints at the ends of the bulbs.

Caution: Review the ESD precautions in Bulletins/ Safety.

1 Place the display facedown on a soft workbench pad.

2 Using a #0 cross-tip screwdriver, remove the two self-threading screws.

Replacement Caution:

Improperly installed self-threading screws could damage the display. Do not overtighten them.

Display Bulb

3 Lift the metal display bulb cover and back it off the display.

4 Remove the display bulb.

Replacement Note: When replacing the display bulb, position the pink cable along the bottom of the display and make sure the display bulb cover is under the tabs at each end of the case.

Û Service Source

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment