Modem Card

Before you begin, remove the following:

  • Main battery
  • I/O door
  • Top case

Caution: The PowerBook 1 60/1 65/1 80 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety.

Safety Precautions For Modem

Caution: If you install a third-party modem card, make sure that it does not cover any of the heat sinks on the daughterboard or over the floppy drive.

Note: The modem card is an option for the PowerBook 160/165/180.

1 Pinch the release tabs and push out the modem port cover.

ï "ff Upgrades

Modem Card - 3

Modem

Modem Card Connector

Modem

Modem Card Connector

Modem Card

2 Connect the modem card connector to motherboard connector J8.

3 Install the two mounting screws.

I Upgrades

Modem Card - 4

Modem Port

_ HD-30 SCSI Port

FCC Modem Label

_ HD-30 SCSI Port

FCC Modem Label

Modem For Coloring

4 Affix the FCC modem label to the inside of the I/O door. Align the label with the modem port.

5 Affix the DOC label to the inside of the I/O door. Align the label with the HD-30 SCSI port.

I Upgrades

PSRAM Expansion Card - 5

PSRAM Expansion Card

+1 -1

Post a comment