External Floppy Drive Continued

Disk does not eject

1 Switch off system and hold mouse or trackball button down while you switch system on.

2 Insert straightened paper clip into hole next to drive opening to eject disk.

3 Check floppy drive cable connection.

4 Replace floppy drive cable.

5 Replace floppy adapter.

6 Replace floppy drive.

7 Replace logic board.

Note: When replacing the logic board, check that the EMI clips are securely attached to the CPU stiffener. The "CPU Stiffener" topic in Take Apart helps you locate and identify the two EMI clips. If both clips are not secure, replace the CPU stiffener.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment