Expansion Bay Modules

Before you begin, unplug the AC adapter.

Caution: You must remove all modules (batteries and drives) in the expansion bays before performing any take apart procedure.

1 Open the display all the way and support it underneath with something flat.

Eject Arm-1

Note: If you do not wish to open the display all the way, open the display to a 90° angle. This will prevent the computer from tipping over when the expansion bay modules are removed.

2 Pull the expansion bay eject arm toward you to eject the module.

3 Slide the module out of the expansion bay.

0 0

Post a comment