Preliminary Steps

Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down for 30 minutes before continuing.

Warning: If the computer has been recently operating, allow it to cool down before performing this procedure.

  1. Shut down the computer.
  2. Unplug the power adapter, phone cord, and any other cables connected to the computer.
  3. Turn over the computer and place it on a soft cloth.
  4. Use a coin to release the battery lock.
  5. Lift the battery out of the battery bay.
6. Install the replacement battery, and reassemble and test the computer.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment